FTDI USB RS232 to 3.5mm audio jack serial cable

Model No:YT-USB-RS232-AJ

FTDI USB RS232 to 3.5mm audio jack serial cable, Model No:YT-USB-RS232-AJ

Product Description:

The USB_RS232 cables are a family of USB to RS232 levels serial UART converter cables incorporating FTDI’s FT232RL USB to serial UART interface IC device which handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with a RS232 level serial UART interface to USB.

Each USB-RS232 cable contains a small internal electronic circuit board, utilising the FT232R, which is encapsulated into the USB connector end of the cable.The integrated electronics also include the RS232 level shifter plus Tx and Rx.

And this is USB RS232 TO DC3.5MM Jack Audio Cable.

Product Features:

1.FTDI USB RS232 to 3-pin 3.5mm audio jack
2.The output signal RX, TX is comfirmed with PC COM port signals.
3.The board available pinout is TX,RX,CTS,RTS,DTR,DSR,DCD,RI,VCC.
4.Self powered by USB VCC 5v, no extra power needed.
5.With Original FTDI FT232RL+ZT213 chipset,it is RS232 type(PC COM port typical signals), not TTL.
6.Tip-RX,Ring-TX,Sleeve-GND as standard pinout.
7.Support Android, Support Win 10, 8, 8.1, Win 7, XP, 2000, Linix, Mac OS.
8.Integrated EEPROM, support Vendor ID re-write,support Mprog3.5.
9.Support FTDI VCP driver and D2XX driver.
10.Support 7 or 8 data bits, 1 or 2 stop bits, and odd/even/mark/space/no parity.
11.Fully assisted hardware(RTS/CTS) or X-On/X-Off software handshaking.
12.Data transfer rates from 300 Baud to 1M baud rate speed.
13.Support for FT232RChip-ID feature.
14.Low USB bandwidth consumption.
15.Length: 1.8m,length can be customized.
16.Color: Black,color can be customized.


Send inquiry to Utech Cables