The USB_RS232 cables are a family of USB to RS232 levels serial UART converter cables incorporating FTDI’s FT232RL USB to serial UART interface IC device which handles all the USB signaling and protocols. The cables provide a fast, simple way to connect devices with an RS232 level serial UART interface to USB.
Each USB-RS232 cable contains a small internal electronic circuit board, utilizing the FT232R, which is encapsulated into the USB connector end of the cable. The other end of the cable is bare, tinned wire ended connections by default, but can be customized using different connectors to support various applications.
The other end of the cable has bare tinned wires and can be customized to your needs using various connectors. The cables are available in two lengths and with an optional power supply output of +3.3V or +5Vdc.
USB-RS232 converter cable provides a USB to RS232 serial interface with customized end connectors.
Entire USB protocol handled by the electronics in the cable USB.
EIA/TIA-232 and a V.28/V.24 communication interface with low power requirements.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space /no parity.
Internal EEPROM with the user-writable area.
FTDI’s royalty-free VCP allow for communication as a standard emulated COM port and D2XX ‘direct’ drivers provide DLL application programming interface.
Visual indication of Tx and Rx traffic via LEDs in the transparent USB connector.
Fully assisted hardware (RTS#/CTS#) or X-On/ X-Off software handshaking.
Data transfer rates from 300 baud to 1 Mbaud.
Support for FT232R FTDIChip-ID™ feature for improved security.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller compatible.
USB 2.0 Full Speed compatible.
-40°C to +85°C operating temperature range.
Custom versions available on request (subject to MOQ).