flat type USB RJ45 console cable
Model No:YT-URJ4502(Flat Cable Type)
This cable is great for use with wireless to serial adaptors such as the Airconsole Serial Adaptor, or with PC and Mac.This cable is 180cm in length so suitable for use with in comms room as long enough to reach equipment in the rack from a laptop, or for placing your Airconsole in a better position for WIFI reception.
USB to Serial cable, RJ45 presentation and pinouts for direct connection to Cisco and other network equipment serial console ports.
THIS PRODUCT IS NOT ENDORSED BY OR ASSOCIATED WITH CISCO SYSTEMS
1.The RJ45 connector can also be adapted to DB9 via RJ45-to-DB9 adaptors.
2.This USB cable has an embedded FTDI 232 and RS232 level shifter to produce true RS232 levels.
3.USB to Serial cable, RJ45 presentation and pinouts for direct connection to Cisco and other network equipment serial console ports.
4.Pinouts for this cable RJ45 end are:
Pin6 = TX
Pin7 = DTR
Pin8 = RTS
5.Support Android, Support Win 8, Win 7, XP, 2000, Linix, Mac OS.
6.UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity .
7.Supports hardware flow control used to implement the CISCO break sequence
8.USB 2.0 Full Speed compatible
Range of Application:
1.Upgrade various satellite set-top boxes.
2.Router, hard disk, ADSL, broadband cat firmware upgrade or cracking upgrade.
3.Mobile phone, XBOX360,GPS serial communication, car detection, DVD reader, etc.
4.Write STC microcontroller, NXP microcontroller, renesas microcontroller, NEC microcontroller, etc.
5.Simple serial port communication, a serial debugging tool commonly used in the terminal.
6.USB signal to RS232 signal that can be used by electronic enthusiasts.
External MODEM,ISDN-TA, digital camera, standard serial mouse, barcode reading device, general card reader, tablet, PlamIII&Palam, label writer, security system,etc.